V-grooving tools

Milling tools for “V” grooves ideal for carve on wood and plastic. Ideal for the realization of molded case in composite materials such as dibond.

Milling tools for “V” carvings (90°)
Series: 7/8/915

  • Milling tools for V carvings D = 6 I = 8 A = 90° S = 8mm
  • Two-edged cutters allow a wide range of milling options
  • Perform clean and precise carvings on wooden panels or drawers
  • Body in special high resistance steel
  • Cutting edges in tungsten carbide micro-grain
  • The V-notch cutters chamfer perfectly at 45°

Technical features

CODE D I L [mm] A S
RM-915.060.11 6 8 38,1 90° 8
RM-715.060.11 6 8 46 90° 6
RM-815.064.11 6,35 3 38 90° 6,35
RM-715.095.11 9,5 12,7 44 90° 6
RM-915.095.11 9,5 12,7 44 90° 8
RM-815.095.11 9,5 4,4 44 90° 6,35
RM-715.127.11 12,7 12,7 44 90° 6
RM-915.127.11 12,7 12,7 44 90° 8
RM-815.127.11 12,7 6,35 44 90° 6,35
RM-915.160.11 16 12,7 52,8 90° 8
RM-915.660.11 16 12,7 63,5 90° 12
RM-815.660.11 16 8 63,5 90° 12,7
RM-715.190.11 19 16 55,5 90° 6
RM-915.690.11 19 16 63,5 90° 12
RM-815.690.11 19 9.5 63,5 90° 12.7
RM-915.817.11 31,7 19 63,5 90° 12
RM-815.817.11 31,7 19 63,5 90° 12,7
RM-915.317.11 31,7 19 63.5 90° 8
RM-815.880.11 38 28,5 70 90° 12,7

V-grooving tools
Series: 7/8/915.01-02

The edge milling process allows you to fabricate three-dimensional elements of the most varied types and formats.

The advantages of the edge milling technique are:

  • Minimal investments
  • Extremely simple processing technique
  • Bending does not necessarily have to take place in the workshop, but can be done on site, therefore low transport costs
  • Economic production of components for facades, frames, coatings for edges of roofs and penthouses, closures, corners, etc
  • Various structuring possibilities
  • Bends are no longer limited by machine measurements

Technical features

CODE D I A L S
RM-715.002.11 18 3,3 135° 60 6
RM-815.002.11 18 3,3 135° 60 6,35
RM-915.002.11 18 3,3 135° 60 8
RM-715.001.11 18 7,4 90° 60 6
RM-915.001.11 18 7,4 90° 60 8
RM-815.001.11 18 7,45 90° 60 6,35