V grooving tools

RM-CUTTERS FOR “V” CARVINGS (90°) SERIES: 7/8/915

Cutter for V carvings D = 6 I = 8 A = 90° S = 8mm. These two-edged cutters allow a wide range of machining options. They perform clean and precise carvings on wooden panels or drawers. Body in special high resistance steel. Cutting edges in tungsten carbide micro-grain. The V-notch cutters chamfer perfectly at 45 °.

Technical features

CODICE
D
I
L [mm]
A
S
RM-915.060.116838,190°8
RM-715.060.11684690°6
RM-815.064.116,3533890°6,35
RM-715.095.119,512,74490°6
RM-915.095.119,512,74490°8
RM-815.095.119,54,44490°6,35
RM-715.127.1112,712,74490°6
RM-915.127.1112,712,74490°8
RM-815.127.1112,76,354490°6,35
RM-915.160.111612,752,890°8
RM-915.660.111612,763,590°12
RM-815.660.1116863,590°12,7
RM-715.190.11191655,590°6
RM-915.690.11191663,590°12
RM-815.690.11199.563,590°12.7
RM-915.817.1131,71963,590°12
RM-815.817.1131,71963,590°12,7
RM-915.317.1131,71963.590°8
RM-815.880.113828,57090°12,7

RM-CUTTERS FOR GROOVES SERIES: 7/8/915.01-02

The edge milling process allows you to fabricate
three-dimensional elements of the most varied types and formats.

The advantages of the edge milling technique are:

– Minimal investments.
– Extremely simple processing technique.
– Bending does not necessarily have to take place in the workshop, but can be done on site, therefore low transport costs.
– Economic production of components for facades, frames, coatings for edges of roofs and penthouses, closures, corners, etc.
– Various structuring possibilities.
– High economy.
– Bends are no longer limited by machine measurements.

Technical features

CODICE
D
I
A
L
S
RM-715.002.11183,3135°606
RM-815.002.11183,3135°606,35
RM-915.002.11183,3135°608
RM-715.001.11187,490°606
RM-915.001.11187,490°608
RM-815.001.11187,4590°606,35